Serving Los Angeles & Santa Clarita · Same-day service available Residential & Commercial · Emergency service 24/7

Electronics

PCB and control board repair

Printed circuit board repair for residential, commercial and industrial equipment. On a modern appliance the control board is frequently the single most expensive part — and frequently the one that fails.

Call 888-349-8699 Book a repair online
Printed circuit board repair under magnification
A component the size of a grain of rice decides whether the machine is scrap.

The economics that make board repair worth doing

On a lot of current appliances the main control board costs a substantial fraction of the machine. When a board fails, the standard advice is a new board — and if the board is discontinued, a new machine. That is how a working appliance ends up scrapped over a failed component the size of a grain of rice.

Repairing the board rather than replacing it changes that arithmetic, and on obsolete equipment it is often the only route that exists at all.

What typically fails

  • Electrolytic capacitors — the classic ageing failure. Symptoms are intermittent: a machine that works when cold and misbehaves warm, or one that needs several attempts to start.
  • Relays — welded or burnt contacts, so a function stops responding while everything else works normally.
  • Power supply sections — no display, no response, nothing at all.
  • Burnt tracks and dry joints — often visible once the board is out, and usually the aftermath of a different fault rather than the cause.
  • Surge and lightning damage — common on commercial sites with heavy inductive loads switching nearby.

An intermittent fault is a board fault until proven otherwise. If a machine behaves differently cold than warm, or works after being left off overnight, that pattern points at the electronics rather than the mechanics.

Factory-direct components

We source factory-direct replacement components rather than generic equivalents. On board-level work this is not a marketing distinction: a substitute capacitor with the wrong temperature rating or ripple-current spec will work on the bench and fail again in months, inside an appliance that runs hot.

What we cover

Residential appliance control boards, commercial kitchen and laundry equipment boards, and industrial electronics. If the board came out of something we service — see commercial equipment and home appliances — we can usually diagnose the board in the machine rather than in isolation, which matters, because a board that keeps failing is often being killed by something else.

Call 888-349-8699 or book a diagnostic. Pricing follows the standard service call structure.

Answers

Frequently asked questions

Is repairing a control board cheaper than replacing it?
Usually, and sometimes it is the only option. On many current appliances the board is a large fraction of the machine's value, and on discontinued models a replacement board may not exist at all — which otherwise means scrapping a working appliance.
My appliance works when cold but plays up once it warms up. Is that the board?
That pattern is the signature of a board fault, most often ageing electrolytic capacitors. Mechanical faults rarely change behaviour with temperature, so an intermittent that tracks warm and cold is worth treating as electronic until proven otherwise.
Why does it matter whether components are factory-direct?
Because appliance boards run hot. A generic substitute with the wrong temperature or ripple rating will pass a bench test and fail again within months in service. Matching the original specification is what makes the repair last.
Do you repair boards from commercial and industrial equipment too?
Yes — residential appliance boards, commercial kitchen and laundry equipment boards, and industrial electronics.
My replacement board failed again. Why?
Usually because the board was a symptom rather than the cause — a failing motor, a shorted heater or a supply problem will destroy a new board just as it did the old one. Diagnosing the board in the machine rather than on its own is what catches that.

Appliance down? Let's get it running.

Same-day service is often available across Los Angeles and Santa Clarita. Call and speak to a person, or send the details and we'll call you back.

Call 888-349-8699 Book online
Call 888-349-8699